Search results

  1. MyHoFoSho

    Bullitt wheels on Grand Am!

    Just wanted to see what my front wheels on the mustang looked like on my wifes 04 Grand Am. They fit really nice alittle wide but looks really cool. The wheels are 18x9 with plus 30mm off set with 245/40s.
  2. MyHoFoSho

    AutoMeter Tach (where to mount)

    So for christmas last year my girlfriend bought me a autometer tach and i have yet to intall it in my car. For one reason: I swaped my dash from the stock grey one to a very very nice black dash and i cant bring myself to drill holes is my dash to mount this tach. So does any one have any ideas...
  3. MyHoFoSho

    5 lug Done Pics Up

    Finally got my 5 lug swap done. I used 94 spindles and cobra brakes up front and ranger axles and drums on back for now. And it is sitting like a 4x4 now i have the trans out and just the bare block in it right now. I just needed to roll it out of the garage and take some pictures. Let me know...
  4. MyHoFoSho

    High Comp Ratio and safe boost PSI

    I have a 347 short block built for the mustang but the plans have changed for it a bit i want to run boost. The motor should have about 10.1 CR, so how much boost can i run safetly. I am also getting anderson motorsports PMS does any one have any experience with these.
  5. MyHoFoSho

    Cobra Brake upgrade questions

    I am looking to looking to do a 5 lug swap and going with sn 95 spindles and was looking into putting just 5 lug ranger drums on the back and going with 94 cobra rotors and loaded calipers on the front. My question is can i use the stock fox body master cylinder and booster or will i have soft...
  6. MyHoFoSho

    Found This Little Guy on Saturday!

    As i was driving out in BFE on my way to my wifes grandfathers house I stumbled upon this notch back just sitting in the grass. When I drove by the first time I didnt see a for sale sign but thought i would look any way. And got to looking at it and the guy wants a $1000 for it, and yes it is an...
  7. MyHoFoSho

    FAST FIVE TONIGHT!

    So who all is going to see the latest installment of the fast and the furious movies tonight at the midnight showing. Just wanted to know if any one else on here is a fan and hoping for a fox to get a shot in the spot light finally...
  8. MyHoFoSho

    Head Swap Questions?

    So started my cam and head swap the other day and everything is going good other than when I pulled my heads off i got to looking at them and noticed that they are E6se heads and the pistons dont have the normal valve reliefs cut in them. But my question is there any other differnce in the...
  9. MyHoFoSho

    4 lug 10th anniversary DEEP DISH wheels!!

    So i was thumbing through my newest editon of MM&FF today and stumbled across these http://www.brothersperformance.com/product/4680/17%22+10th+Anniversary+Style+Wheels+4+Lug.html?show_all_apps=1 I was so excited to see this I want to deep dish wheels on the old 4 lug. And they look great and...
  10. MyHoFoSho

    Push rod length question!

    Ok i am putting some gt40 heads, tfs 1 cam and scorpion 1.6 rr this winter. I had the heads rebuilt and decked .0030" and also with the addtion of the new cam and roller rockers should I measure for new push rods. I know the rockers may or may not have to be shimmed. Is the shimming of the...
  11. MyHoFoSho

    Daily driven 5.OH what you think?

    Ok i am looking to buy a 1986 Mark VII LSC for $1850. It has like 86,xxx miles on it but what you guys think about them. And also i know the motor is all stock and had n2o run in the motor once or twice. The guy told me he did so not sure if it hurt the motor to bad or not or how bad the n2o is...
  12. MyHoFoSho

    Any one run Roller rockers on GT40 heads

    Ok i am putting gt40 heads on the little 5.0 and i have been reading about roller rockers for the heads i know i need special rockers for them but where to get them, how to set them up and do they really help. I know they say that roller rockers are suposed to help out but have never put them on...
  13. MyHoFoSho

    347 not sure what to do?

    Well i will just get to the gettin- I have a built 347 mexican block that is hardcore built with all forged internals slight domed pistons, it is hardcore little block. Well i bought the block with big plans to put it in with some AFRs custom cam and make it even better but life has a way of...
  14. MyHoFoSho

    Want some new Gears!

    So i was thinking of getting the mustang regeared. It has some 3.73s in it now but i was thinking of steping up to a 4.10 or 4.30s. I am not sure if i should do the swap or not. Right now i have eddy performer rpm2 intake gt40 heads and tfs 1 cam with 70mm t-body 75mm mas air, under drives, and...
  15. MyHoFoSho

    5.0 in Dodge lol But sweet

    So a friend of mine got his first 5.0 HO today but it is in a dodge conquest...LOL but the car is sweet and the swap looks to be done very very well and it drives exellent we drove in 5 hours home and ran like a top. And only used half tank of gas 20 gallon tank all and all he had a smile on his...
  16. MyHoFoSho

    Mark 7 as a daily driver

    Thinking of selling my jeep wrangler and getting a old Mark as a DD. Any one here have experiance with these cars like with the air suspension or the boat load of electronics on them. I love the way these cars look and sound and have a ton of stuff to put on a stock 5.0 exhaust cai, exploder...
  17. MyHoFoSho

    Home head Porting

    ok i got a set of gt 40 heads and tfs1 cam to put in my car i was just wondering if any one has done a home port job on heads before and what you used and any tips and if it matters if the runners have the same flow from cylinder to cylinder because i have no way to measure if they are the same...
  18. MyHoFoSho

    19lbs injectors with gt40s and tfs1 cam

    Ok i am getting a set of gt40 heads and a tfs 1 cam and i only have 19lbs injectors could i run that for a bit and be ok or is it going to be way to lean. I plan on getting bigger injectors but dont have all the cash right now. Or do i need to just find 24s now and call it done. :shrug:
  19. MyHoFoSho

    B303 cam questions

    Ok i want to cam my mostly stock 5.0. I am building a 347 but it is going to take awhile to build so i want to put a cam in my little 5oH because i am bored this winter and want something to do to it. So i was going to go with a b303 cam because the motor is stock other than performer intake...
  20. MyHoFoSho

    Mexican 347

    I am trying to sell my project. I have a mexican blocked 347 put together by Fall performance. It is all forged internals, flat top pistons that were sand blasted to eliminate hot spots. Have more stuff to sell with the engine. I would like 2,200 for the engine. Email me for pics.
Top Bottom
Back
Forums
Menu