Search results

  1. J

    Question about C&L fit 00'

    it is n't a big deal i use the newer C&L on my car, well i did before it got smashed sunday night.
  2. J

    How to tell if quad shocks are busted

    i have mac upper and lowers and lost the quads for about 4 passes at the track. Hell, no. I put them back on and it took care of the wheel hop.
  3. J

    3.73 gear install for 98 gt vert auto

    and you will be happier with 4.10's
  4. J

    pi swap

    yes, and i'm not only the president, i'm also a client.
  5. J

    Best Launch RPM For A Stock Auto?

    this man speaks the truth. Hell, i'm lying, autos LOVE nuetral drops, the higher the better, just stomp the gas and let it bang the rev limiter, slam the shifter in D and feel the POWER!!!!! let us know how it turns out :D
  6. J

    How Many Hours to Swap Intake Manifold?

    It's gravey after the first time, on a 96-97 it's a little longer to replace the waterpump nipple, but on my 98 i can do it in about an hour and a half. the plugs only plug in thier specific sockets andf the vacuum lines are pretty easy to remember. Of course if you have ever tried to search...
  7. J

    What do 3.73's Tac at?

    not very correct, the 8.8 is a 3.27 :( i'm alos not sure about the 3.55 in 04 it's been rumored but i haven't talked to anyone who has them. the first 4 gears in the t-45 and t-3650 are the same from (96-05) 3.37, 1.99, 1.33, 1.00 but in overdrive the t-45 is .68 and the t-3650 used in...
  8. J

    What do 3.73's Tac at?

    you should be about 2700rpm at 80 with 3.73 my 4.10'a rap about 2900-3000 at 80
  9. J

    Spark plug woes....Any Ford techs here???

    do NOT use loc-tite on them, your supposed to use anti-sieze. and if there is oil in the plig you are leaking it from the valve cover or from the piston rings, more likely the valve cover.
  10. J

    4.6 Intake Manifolds - NPI vs. PI

    16" bfg's about 4500-5000rpm launch
  11. J

    4.6 Intake Manifolds - NPI vs. PI

    I did the PI intake and cam swaps, see sig for results.
  12. J

    another gear survey

    i drive over 40 mi. highway 1 way usually about 75mph with 4.10's almost 120k on the car and runs better than it ever has.
  13. J

    Ported 99 intake on 03 plenum

    I have ported uppers for people and any upper plenum will bolt up from any 2v (other than bullit or SVO) the only issues are as stated above, you may need to modify some of the hoses.
  14. J

    97GT... mods fried my clutch?

    what he said, time to upgrade. mine lasted 85k miles, but only 20k of it was with me flogging it.
  15. J

    All Aluminum PI Style 4.6 Intake - 5.4 Version coming Soon!!!

    nitrous backfires are caused my puddling, not the other way around. and a big enough backfire will sen any intake through a hood, an al. one is only insurance for small ones.
  16. J

    [email protected] N/A GT

    are we separated at birth :shrug:
  17. J

    [email protected] N/A GT

    yes intake and cams, all the mods are in the link in sig. can't wait to run again this fall i've lost 40lbs off of ME, deleted rear seat, spoiler, and other mild wieght reduction. and added a 75mm and C&L. hopeing to get into 12's with headers (hopefully to be bought and installed next...