exhaust

  1. Noobz347

    The Last "What's the Best Sounding Exhaust" Thread - Mustang 2020

    View: https://youtu.be/zOqdQUOTjV0
  2. J

    My new 2001 Cobra is here

    Hello every one. Just bought a 2001 Cobra. Car needs a clutch. I already bought an Excedy Stage 2 and an SLP loudmouth 2 exhaust. While I have the transmission out what else should I do to the car at the same time? Any suggestions? Tranny mounts? Etc.... Figure while I’m dropping the cats and...
  3. A

    Exhaust Downpipe bolt is stuck

    (99 V6) So I have an issue with my downpipe ATM. My driver-side downpipe has a bolt that seems stuck, and I'm not quite sure what size of a bolt I need to get for my year. One of the bolts is fine, but because one of them isn't there, I currently have an exhaust leak. Kinda makes it sound :poo:ty...
  4. austindorow

    02 GT cat delete question

    has anyone ever cut out the second from front cats on a 2v, hows it sound, and will it throw codes, my current setup is stock cats with offroad h pipe no muffler. the ones i want to cut out are circled. thanks
  5. A

    Exhaust 99 V6, P0135 Code

    I have an engine code for P0135. Sensor 1, Bank 1. I know that sensor 1 is upstream/front, but which side is Sensor 1? I’m not entirely sure. I ordered a new O2 sensor from AM to replace it. And also, is it before or on the catalytic converter? Thanks for any answers. I definitely want to get...
  6. J

    Exhaust 1992 gt - flowmaster super 10 offset/offset vs. offset/center. whats the differences?

    trying to decide on a new exhaust setup for my 92 gt, thinking about doing an offroad BBK H-pipe paired with super 10 mufflers, but i want to know the difference between the offset/offset super 10's and the offset/center super 10's.
  7. T

    GT40P Heads Exhaust

    Quick question because I couldn't find any straightforward answers. I just swapped my heads over to the GT40P's out of a 1997 Explorer. I kept the headers that I had on my Mustang and now, even after flipping my plug wires around, I'm still constantly melting wires 4, 7, and 8 because of the...
  8. A

    2003 GT 4.6 - Best exhaust from 3 options

    Hi, I have a completely stock 2003 Mustang GT 4.6. I have three local exhaust opportunities each at $100 1: Stock system just replacing mufflers with Borla Bullet Style mufflers 2: Stock system with Flowmaster Super 44 mufflers 3: BBK Offroad X pipe 2.5” with Dynomax Super Turbos I’m looking...
  9. 9

    Need Help on what I need - New to the game

    Hey people. I am new to the fox game and I am looking to put some money into my car. I am working with a bone stock 92 5.0 LX. this car runs strong and really does not have any issues. any help on what I should do first to the car would be great. I am looking to make a nice weekend driver and...
  10. J

    Fox 1992 GT - which exhaust setup?

    i want an exhaust setup with a deep and throaty rumble sound, similar to the slp loudmouth catback but something deeper and maybe not as loud. i was thinking flowmaster super 10's with an H pipe and some long tube headers. if anybody knows of any other options i could go for that are for a...
  11. paddyrk

    Fox Why are these so loud?

    I have a 1991 5.0 LX, swapped for a 347 stroker, and it just seems incredibly loud. I have had multiple exhaust set ups on this car (all had shorty headers and an x pipe), and it seems like they are almost all the same loudness. I had a dump exhaust with mufflers, then I put on tailpipes, then I...
  12. B

    2017 Axle Back Kit

    Hello. I have almost no experience with modding, but am looking at putting an Axel back kit on my 2017 V6 (stock sound is quite boring). Looking at a few options on CJPonyparts, but without being able to hear them, it's really just a flip of the coin, so I was hoping to get some feedback from...
  13. paddyrk

    Digital Tuning 1991-exhaust crackles

    Hello all, I have a 1991 347 stroker lx 5.0 with the HP EFI system. I have an off-road X-pipe with shorty headers, full tail pipes, and mufflers. I would like to know how to do exhaust pops and crackles, such as when I let off the throttle after acceleration. I have not had any success with...
  14. E

    Help with Tune!!

    Hi, I’m currently driving an automatic 2017 5.0 with a roush cold air intake, roush full active exhaust and own a SCT X4 tuner with a Standard 93 octane tune but it seems to be riding a little rough (especially when downshifting, mostly into second gear) Any suggestions what I could change as...
  15. J

    Exhaust Headers Recommendations

    Anyone have any experience with or recommendations for a set of headers for a '67 with a 289? I have factory air and power steering with and AOD swap. I'm looking for a pair of shorty ceramic headers that will fit with little to no modifications (except for maybe some work between the headers...
  16. R

    Engine Headers on or off when build in engine?

    Hi all! I am busy with replacing the rear main seal on our 1977 302. First I got the trans out (C4), but to do this I had to get the driverside header off, that worked. The passenger side header is loose and I only get it out if I lift the engine. The engine has to come out to do the rear main...
  17. Sheep Dowg

    Gt40p Blues Stuck In Da Stable.

    Greeting Stangnet, This is my first thread ever. I feel like I’m posting wrong because there is lots of GT40P info in here. So here goes. My Stalions a 68 Coup, 90EFI, newly machined GT40P Heads, T-5 tranny with newly installed clutch cable. I didn’t do my resurch well enough as I have newly...
  18. D

    2002 V6 Exhaust System

    With the picture I provided, can anyone tell me if that is a catalytic converter, or a muffler??
  19. MoDriver

    SOLD New Mac Chrome Exhaust 2-1/2" Tailpipes For A 64.5-73 Mustang

    Listed is are New MAC Chrome exhaust 2-1/2" Tailpipes for a 64.5-73 Mustang. I intended to use this on a 1966 Ford Mustang. This should work on most 64.5-73 Mustangs with dual exhaust. Asking $115 So, this is a good deal for high performance exhaust components (compare with vendors like...
  20. MoDriver

    SOLD Dr. Gas Exhaust X-pipe 3" X 3" Kit With Summit Header Collector

    Listed is a 3" x 3" Dr. Gas Exhaust Crossover kit with Summit header collector, I intended to use this on a 1966 Ford Mustang (with headers). This should work on most 64.5-73 V8 Mustangs. actually since it is a cut and weld to fit solution it should fit most applications using a 3" X-pipe or...