cobra

  1. 9

    Questions about seats

    Hi all. First post in a long time. Just bought a 1996 Mystic Cobra after 4 years of not having a Stang. This is my 8th Mustang and i think it might be a keeper. Anyway, one of the things I would like to change are the seats. I'm pretty tall and have always found that the seats in the SN95s...
  2. Abe.Early

    New 93 Cobra owner

    Just picked up this 93 Cobra with a '13 BOSS 302 coyote swapped in. I currently own a '00 ranger that I swapped a HO 302 from a 01 explorer with a t5, and a 01 explorer.
  3. robert robinson

    New engine for Mach 1?

    I have a 2003 Mach 1 that just rolled 167000. It leaks oil, has a little tick or rattle and it starting to show it's age. My question is, where can I find a new 4 valve 4.6 long block or short block. Everywhere I look it's all coyote stuff. I understand the coyote is a great motor, and I'd...
  4. J

    My new 2001 Cobra is here

    Hello every one. Just bought a 2001 Cobra. Car needs a clutch. I already bought an Excedy Stage 2 and an SLP loudmouth 2 exhaust. While I have the transmission out what else should I do to the car at the same time? Any suggestions? Tranny mounts? Etc.... Figure while I’m dropping the cats and...
  5. W

    Engine Questions about cobra intake manifold

    I somewhat recently purchased a cobra upper and lower and will soon get around to installing them. As my car is a daily driver I am trying to sort out any issues beforehand. I know this is a common swap so I'm sure some of the information I'm asking for is out there I'd just like to be certain...
  6. T

    2001 Cobra, I need some help

    I recently bought a 2001 Cobra and I noticed when the car is fully stopped and you try to shift into 1st gear, it grinds occasionally, even with the clutch pressed all the way in. Any ideas on what it might be and what I can do?
  7. S

    For Sale 2003 Cobra Redfire Convertible

    2003 Cobra Convertible Redfire Exterior Color Black cloth top Black interior with Gray insert (Alacantara) and leather 68k Miles Price is $21,500 Located in Hoover, AL Built May 27th 2003 and is 3938 of 5082 and about 611 in this combination Original Purchase was at Eckenrod Ford, Cullman AL I...
  8. M

    For Sale Mustang weld wheels XP

    Weld wheels 17x9's front 17x10's rear, brand new tires 245/40/17's 315/35/17's RARE wheels never seen weather $1800 859-816-7743 not on here much so texting is the best way to reach me 5x114.3 also has other 5 lug holes (was on gto) Burlington ky Mustang Cobra Gto Corvette Lexus Supra
  9. N

    2003 Mach 1, electrical issues

    I have a couple issues going on with my Mach 1 at the moment. For one i recently replaced my drivers side window motor since it went out but now when ever I raise it all the way up or drop it all the way down the motor doesn't stop and make a loud clicking sound of the 2 gears clashing unless I...
  10. Hoytster

    1999-2004 Cobra IRS Hardtail Mount Fabrication 1-a

    I will update this resource shortly as a step-by-step process. Link above is a direct download to a .zip file that includes the measurements for cutting out the pieces needed to fabricate the IRS hardtail mount and the process pictures of how to fabricate the mount. There are other ways to do...
  11. M

    Help Removing 1996 Cobra Master Cylinder

    I need some guidance on removing the lower nut securing the master cylinder to the hydroboost. I have searched online but found nothing. The space is so small and I can barely get a hand between the valvecover and master cylinder using the smallest socket wrench I have. I've also tried to go...
  12. Doomstang

    Anyone selling 03 rear cobra bumper?

    Is anyone selling their rear cobra bumper or spoiler?
  13. Calcul0n

    Driveline resistance with 2001 Cobra IRS

    I have a 1993 GT, and I have been going through the steps of an IRS swap over the past several months, and finally drove the car about 1 mile. The problem now is that there seems to be quite a lot of driveline resistance. I have thoroughly cleaned out the diff and have fresh diff oil in there. I...
  14. B

    Can someone help me figure out what headlights these are?

    Hey everyone, bought a 96 Cobra. Looking to purchase headlights identical to these and have been searching all over for them but cannot find them. Can someone please help? I'll attach and image. If anyone can tell me the name, provide a link, anything! I would greatly appreciate it. Thanks...
  15. S

    For Sale 1998 Ford SVT Cobra Black

    ~ 1998 Form SVT Cobra. Professionally modified street comp car. Owned by certified professional auto technician, this car was consistently being upgraded and maintained throughout the years, and kept indoors. Summary of engine and suspension modifications include (PLS refer to pictures and...
  16. MoDriver

    SOLD ProCharger P600B Supercharger w/Intercooler for 96-01 Ford SVT Cobra

    [SOLD] Listed for sale is a polished ProCharger p600b kit (With Intercooler and new Fuel Injectors) that was designed for 1996-1998 Cobra Mustangs that a coworker adapted to a 1999 Cobra Mustang (so, it likely can work on 1999-2001 Cobras). I bought it from a coworker to use on a 1998 Mustang...
  17. W

    Need Help With My Fox Body Irs Swap !

    Okay so this is my first post to the forum and I’m not quite sure how to go about my situation. I’m in the middle of swapping a 2003 or 2004 IRS in my 1991 hatch back. The car was a father/son project and my dad has recently passed so I’m kinda stuck. From what I know and have been told by my...
  18. Hoytster

    Expired Mustang Cobra Irs

    Looking for a good condition Mustang Cobra IRS unit to swap into my fox hatch. Would prefer a 2003-2004 unit. Can be 100% stock or fully built. Have cash in hand and willing to make a couple hundred mile trip if necessary. I'm located in SE PA. The complete stock 8.8 axle in my '89 is up for...
  19. S

    Mark 8 Cobra Build

    Hi everyone, so I got a good deal on a nice 94 Lincoln Mark VIII 32v engine and was wanting to swap into my 98 gt. What all do I need? And I plan on buying new heads, cams, intake, etc. for it anyway but if I were to buy cobra parts for it(such as intake) then what year cobra do I buy them from?
  20. MoDriver

    SOLD New Hawk Performance Hps Front Disc Brake Pads Hb194f-665 Mustang (see Description)

    Listed are New Front Hawk Performance HPS brake pads. Fits Brembo 4-piston caliper "Gran Turismo" 13" front brake kit*, 2000 Ford Mustang Cobra R, early(1992-2001) Dodge Vipers, and most(2000-2005) Ferrari 360s. Please do your research on fit for your specific application (I have included...